How To Apply Gyeon Q2m Wetcoat: 5 Minutes Steps To Be Done!

Ollie Barker

How To Apply Gyeon Q2m Wetcoat

How To Apply Gyeon Q2m Wetcoat

How to apply Gyeon Q2m Wetcoat? If you’re looking for a quick and efficient way to protect and enhance the shine of your car, Gyeon Q2m Wetcoat is a fantastic product to consider. Designed to be user-friendly and effective, Gyeon Q2m Wetcoat allows you to achieve a glossy, hydrophobic finish without the need for complicated application procedures.

In this article, we will guide you through the process of applying Gyeon Q2m Wetcoat to your vehicle, ensuring that you get the best results possible.

One of the best ways to keep your automobile looking great is by applying a two-coat system that is made with a special anti-static, anti-frost, and outdoor formula. This plus a car wash can protect your car’s paint from problems such as oxidation caused by dust on the roads or sun spots damaging your vehicle’s looks for the next few years.

What is Gyeon Q2M Wetcoat?

Q²M is a silica-based, spray-on coating that can be applied after washing but before drying. Washing your car more often than once a week will make your car’s durability last for up to twelve weeks. And it helps your Q2M layer stays longer to its longest in about three months.

  Can You Clear Coat Over Primer? [Answer Revealed]

How To Apply Gyeon Q2m Wetcoat

You can follow these steps to apply Gyeon Q2m Wetcoat effectively:

Step 1: Shake the Bottle

Shake the Gyeon Q2m Wetcoat bottle well to ensure that the product is properly mixed.

Step 2: Spray the Product

Spray Gyeon Q2m Wetcoat directly onto the microfiber applicator pad. Avoid spraying it directly onto the car’s surface to prevent overspray.

Step 3: Apply to the Surface

Using the microfiber applicator pad, apply Gyeon Q2m Wetcoat to a small section of the car’s paintwork. Work in straight lines or circular motions, ensuring even coverage.

Step 4: Wipe Off Excess

After applying Gyeon Q2m Wetcoat to a section, immediately buff off any excess product using a clean microfiber towel. This step helps to avoid streaks or high spots.

Step 5: Repeat the Process

Continue applying Gyeon Q2m Wetcoat to the rest of the vehicle in small sections, repeating the application and wiping off the excess product as you go. Make sure to cover all areas of the car’s paintwork, including the hood, roof, doors, and trunk.

Step 6: Allow to Cure

After applying Gyeon Q2m Wetcoat to the entire vehicle, allow it to cure for the recommended time specified on the product’s instructions. This curing period allows the coating to bond with the surface effectively.

Step 7: Final Buffing

Once the curing time has elapsed, perform a final buffing of the car’s surface using a clean microfiber towel. This step helps to enhance the gloss and remove any remaining residue.

Additional Tips and Recommendations

  1. Avoid Direct Sunlight: It’s best to apply Gyeon Q2m Wetcoat in a shaded or indoor area to prevent the product from drying too quickly and potentially causing streaks.
  2. Use Multiple Applicator Pads: To ensure even application and avoid cross-contamination between products, consider using multiple microfiber applicator pads.
  3. Maintenance and Durability: Gyeon Q2m Wetcoat provides protection for several months. Regularly wash your car with a pH-neutral shampoo to maintain its hydrophobic properties and use a dedicated spray sealant as a maintenance booster.
  Maximize Your Car's Value: Comprehensive Car Detailing Checklist

Check out this video for more ideas!


1. Can I use Gyeon wet coat on wheels?

With such an ease of application, the product still reaches impressive durability, staying up to 12 weeks without losing its full hydrophobic effect while outshining most natural waxes and spray sealants.

2. Can I use Gyeon wet coat on glass?

You can use a coat that shows the same properties on glass. I use a dedicated glass coating, but you can use the Gyeon Wet Coat if you don’t.

3. Can I use detailer spray on top of this product?

After using Gyeon Wet as a final wipe-down, I’ve tried several quick detailers. It’s been a while since I’ve tried one, but I don’t think I noticed any negative effects from using it.

 4. Can I use a towel to dry the car after the final rinse?

I’ve been using a leafblower to dry my car coatings for years, and it works great. It doesn’t have any odor or residue left behind.


Applying Gyeon Q2m Wetcoat is a straightforward process that can significantly enhance the appearance and protection of your vehicle. Following the step-by-step guide outlined in this article, you can achieve a glossy, hydrophobic finish that lasts for months. Remember to prepare your vehicle properly, use the recommended tools and materials, and follow the curing and buffing steps for optimal results.

Now, go ahead and give your car the protection and shine it deserves with Gyeon Q2m Wetcoat!