How To Fix Steering Wheel Shakes While Braking at High Speed

How To Fix Steering Wheel Shakes While Braking at High Speed

Steering wheel shakes while braking at high speed is a common occurrence while driving. The shaking is a warning from the vehicle control unit telling the driver that the wheels have come to a sudden stop. Most vehicles do not have an anti-shaking device installed into them. However, modern cars have a device called EBC or Electronic Brake Force Distribution. This device is usually fitted to the wheels of high performance vehicles like racecars.

Causes of Steering Wheel Shakes

There are some common causes of steering wheel shakes while braking. They include slipping road repairs, bad alignment, bad tires, and brake failure. These issues can be solved by getting the car repaired. However, most of the drivers do not know how to fix the problems. If you want to know more about the solutions, then you can read this article.

To avoid shaking while braking, you can increase the amount of pressure on the pedal by adjusting your vehicle control system. You can increase the power of your steering by adjusting your steering wheels. You can also increase the rate of your vehicle speed by pressing your accelerator. If you find any strange signals in your vehicle’s control, then you should consult with a mechanic.

Worn-out Steering Wheels

You should adjust the steering wheel if you find that its speed is slowly falling. If you want to increase the power of your steering, then you can add some oil to the steering lines. You should also clean the steering lines on a regular basis. In addition, if you have worn-out steering wheels, you should replace it immediately to avoid shaking while braking.

Lack of Steering Control

Another cause of steering wheel shakes while braking is the lack of steering control. This is the main reason why many accidents occur in a driving course.

How To Fix Steering Wheel Shakes While Braking at High Speed

Steering Wheel Assist

The device makes use of electric power from the electric motor, gear reduction, and front wheel spin. It provides you with better control over the steering system and protects your body from possible damages. Modern vehicles come with this kind of device, however, it is quite expensive. However, most auto insurance companies cover the cost of steering wheel protection in case you get into an accident that is your fault.

This device works as follows: It senses the speed at which you are driving and changes the power to the wheels automatically. It also senses whether you apply or decelerate your foot from the steering. When you apply your foot, it applies more pressure on the pedal than when you decelerate it. Then, it checks the monitor mechanism and decides whether to activate the brakes or not.

Install a Steering Device

You should install a steering device such as a steering rack if you wish to control your vehicle. Most of these steering devices are operated with the help of a screwdriver. A steering rack can be fixed to the steering wheel or can be attached to the frame of the vehicle.

However, if you are not aware of the proper installation procedure, then you should hire a professional to install it for you. You should know how to install it properly before you start driving. A steering mechanism needs to be properly fixed to prevent shake while braking. If you have damaged your steering wheels or steering mechanism, then you should replace it immediately to avoid mishaps. In addition, if you want to drive safely, you should keep your steering wheel and steering mechanism clean.

Keep the Steering Wheel Clean

The steering wheel shakes while braking happens due to the wear and tear of the steering mechanisms. Sometimes, the steering mechanisms get damaged because of extreme acceleration and deceleration. In such cases, the wheels can get damaged because of the impact of the road surface on them. The steering mechanism can get damaged if it is not given enough care. This is why it is very important to ensure that your steering wheel is kept clean at all times.

Car Wash Once in Every Week or Month

In order to maintain your steering mechanism in good working condition, you should make sure to use a car wash once in every week or month. If you follow this rule, you will be able to keep your steering mechanism free of dust and other material that can damage it. You should not forget to lubricate your steering mechanism after every wash. In fact, there are numerous types of car wash products available in the market. Therefore, you can use any of them to maintain the condition of your steering wheel.


Steering wheel shake while braking happens due to a variety of reasons. The main reason behind it is poor steering control. In most cases, you will be able to fix the problem yourself if you know how to change the steering locks. If you need more information about the steering mechanism, you should consult an expert so that they can guide you.