How to Change Front Brakes on Dodge Ram 2500

This article may contain affiliate links. For details, visit our Affiliate Disclosure page.

How to Change Front Brakes on Dodge Ram 2500So you are interested in learning how to change front brakes on Dodge ram 2500. Well, you have made a good choice because brake pads are one of the most important parts of your automobile.

Your brakes keep your vehicle from rolling when you apply them, and they keep you from driving bumpers into things when you break a rule. However, you cannot simply take off your old brake pads and replace them with new ones just because you want to make your car look cool. Believe me, your brakes will not look so good, so why try that? Here are some simple steps that will get your brake pads looking good again.

What You Need for Your Car

The Size of Caliper and Pads 

When looking at the brakes on your car, notice the front wheel and then the caliper. You will see that the caliper is the rubber portion that surrounds the caliper, and it has two pads inside of it. The size of these pads is very important, and you should get the correct size caliper for your vehicle, regardless of what you might think.

A Front Brake Pad

If you have a front wheel drive car, you need to get a front brake pad that is wider than your wheels to absorb more heat when you apply your front brakes.

How to Change Front Brakes on Dodge Ram 2500

Now that you know what you need for your car, you can go ahead and look at how to change front brake pads on Dodge ram 2500.

Step 1: Removing All the Old Pads

Start off by removing all the old pads that are on your front brakes, and then find a clean rag and pull out the old rubber pads. Now wipe these off, making sure you don’t miss any. This process is very important, and it is very important to make sure that you do it right.

Step 2: Get Some New Pads

Now that everything is off of your front brake pads, you should remove the new ones that you have just bought. The first thing that you will want to do is get some new pads, since the ones that you have will not do much good. You can find them in the dealership that you purchased the ram car from, or online. When you are shopping online, make sure that you look for a discount price, or try looking for aftermarket prices on these products.

Step 3: Put the New Ones on

When installing new ones, you will need to find a screwdriver to help you. Once you have the screwdriver, you will need to take the new ones and slide them under the existing ones. This process may sound strange, but it is done quite a few times each day. It just takes a little extra time, but it’s better to be safe than sorry. Once you have put the new ones on, check your existing brakes to make sure that they are working properly.

Safety Precautions

Before you are going to change the front brake pads on your Dodge ram, you will want to take some safety precautions.

Replace the Hood Lock

The first thing that you want to do is replace the hood lock with a clip. There is a small hole at the top of the hood that will allow you to connect the clip to the lock. Once you have done this, it is very important to ensure that you use the correct size lock. If you do not use the correct one, there is a chance that you can lose your key and have the car become an impenetrable fortress.

Locate Your Brake Caliper

The next step in learning how to change front brake pads on Dodge ram 2500 for your car is to go ahead and locate your brake caliper. You will want to locate it by loosening the bolts holding the brake pads in place and then locate the caliper itself. Once you have located the caliper, you will need to pull it out through the hole that was drilled into your dashboard.

Install the New Pads in Reverse Order

The final step in learning how to change front brake pads on Dodge ram is to install the new pads in reverse order. You will need to make sure that you tighten the bolts holding the brake caliper in place the same way that you loosened them. This will ensure that your front tires and wheels are properly aligned.


When you have completed all of these steps, you will be able to drive your car normally again and enjoy the full potential of your new brakes.

Rate this post